Friday, February 20, 2015


As there is usually some residual Acraglas around the fronts of the scales, I clean this with a brass scraper. Do not use anything steel on here or you may scratch the blade.


The lanyard tubing is sharp on the inside. This will cut or wear the lanyard.

I used countersink to chamfer the inside of the lanyard tube.Then touched up with a round needle file.

Then buffed with a plain cotton wheel.
Now to add the steel type to the underbelly.

This is how the etch turned out. I polish this with some Renaissance Wax when buffing the finished knife.

Here are some shots from the light box...

No comments: