Two FK3 Fillet Knives

Two 8" Filleting Knives for Christmas

The top guy is made from 3/32" AEB-L stock with a stabilized curly blue dyed maple handle.
The bottom is made from 3/32" 154CM stock with stabilized Karelian birch with 304 SS bolsters.
(Click for larger image.)

Dan

DH64 in AEB-L and Desert Ironwood

DH64 made from AEB-L and desert Ironwood I made from this template. I shortened the blade to fit a piece of steel I had lying around. The pins are 304 stainless and the Ironwood is satin finished with 400 grit wet/dry sandpaper.

Something katana blade looking about the handle.

Dan