If you need help in making a pattern, see the small post on the bottom of the original Knife Patterns page. For additional patterns, see the Knife Patterns II, Knife Patterns III, Knife Patterns IV and Knife Patterns VI pages.
Please
CP30 Mako Style Clip
KN65 A and B Santoku Style
SB1 (Through Tang Straight Back)
DH64 Full Tang Drop Point
CP28 Tactical Clip
DH61 'Kephart Style'
KN46 Chef
KN45 Hidden Tang Chef
DH60 (Fat Handle)
CP27 Hunter/Skinner
TP2 Skinner
CP26 8.25" Clip Point Full Tang w/Variations
KN58 Full Tang Chef's Knife
KN48 8" Chef's knife
DH59 Hunter/Skinner
KN44 9-1/2" Clip Point Hidden Tang Chef Knife
KN43 Santoku wa
KN39 Honesuki wa
KN40 Hidden Tang Chef, 200 mm x 50 mm (7.75" x 2")
CP24 Clip Point
CR1 Cleaver
CP23 Clip Point
CP22 Clip Point
KN38 Kitchen Utility
For additional patterns, see the Knife Patterns I, Knife Patterns II, Knife Patterns III, Knife Patterns IV and Knife Patterns VI pages.
Dan
28 comments:
I love these knife templates! They're perfect and are nicely formed/laid out. Keep up the good work :)
Thanks Peyton. I hope that you find them useful.
Dan
your knife templates are the best in the business thank you
I love your templates. I'm a beginner and they really inspire me.
Do you have any Boyarin templates? I saw this knife but couldn't find a template and I think I would mess up the proportions if I tried to make one by myself.
Yes those are very cool knives. It's a little on the large size for standard A4 or 8.5" x 11" paper. I'll see what I can do.
Dan
For someone just starting out your templates are so valuable! Thank you!!
Thanks a lot, Dan
Thank you so much for the templates, they're all fantastic! But could you do a KA-BAR template? I don't know if it's possible but I'd really appreciate anything you could do.
Thanks!
Dan, thank you so much for sharing these. As a beginner, I really appreciate these beautiful designs. Greetings and best wishes from New Zealand.
Thanks for sharing!
Hi Any santoku wa handle template? Thank you in advance
Thanx for the santoku template and the kindness sharing your work. You are such a wonderful person. I hope you can make a 240mm wa gyuto, that would be highly appreciated. Thank you
Looking for a seax pattern
Fantastic selection of templates! Thanks very much!!
Thank you for these templates. Very handy. Cheers!
Thank you very much for this wonderful wealth of info.
Thank you for sharing your knowledge. The templates are handy and very well designed... A very good starting point for beginning knifemaker!
Your collection of patterns is simply awesome! Thank you for your time and hard work.
Thank you for making these public use. These patterns are awesome and a huge help. Do you by chance have a bowie pattern?
Thank you for all your hard work over the years. Would you consider making a Kephart design? I think it's the best utility knife ever designed.
Thank You for your efforts with the knife templates and all the other info you
have posted, it has enabled me to be able to start with a huge advantage
compared to starting out all by trial and error. I really appreciate what you have done.
Cant thank you enough...
Thank You again for all the information, knife templates and your dedication to helping others like myself. Your work has made it much easier for me to be able to make knives by showing in common sense instructions the process.
Steve R.
Thanks Steve!
Does anyone have a template for a ka-bar?
thanks there awsome and i use them a lot
Would any of these designs make a good throwing knife?
Hi,
Most of the throwing knives I have seen have a symmetrically ground blade like a dagger and usually have nothing attached for a handle. No scales if you will as these will eventually fatigue from impact. I have a couple of throwing knife designs. I will put up a PDF when I can.
Dan
Post a Comment